Home / Guides / Testing, commissioning and faults / Protection testing
Protection testing
Testing, commissioning and faults
Breaker Pole Discrepancy Protection: What It DetectsWhat pole discrepancy protection is on a breaker with independent poles, why it exists, how it relates to reclosing and what is verified in the logic.Protective relay test plan: what it should coverWhat a protective relay test plan should cover: functions, logic, trips and communications, in what order and with what acceptance criteria (IEEE C37.233).Line Differential (87L) Testing: What Is VerifiedWhat a line differential 87L test checks: relay, channel, time synchronization and stability, local and end-to-end tests, and the final test report.MT, AT, EATProtective relay commissioning: what is verifiedProtective relay commissioning: how it differs from acceptance and maintenance testing, and what is checked in hardware, functions, logic and tripping.ANSI 81Functional Tests of the Frequency Protection (81)Which tests IEC 60255-181 defines for an 81 frequency protection: what each one measures, what is reported and how they differ from field tests.MT / ATTesting a Multifunction Generator RelayThe three test levels for a multifunction generator relay (evaluation, acceptance and commissioning) and how to tell which function operated in practice.ANSI 79Reclosers: What Is Tested Before EnergizingWhat is checked on a recloser before energizing: isolation from the network, supply, batteries, settings, injection, control levels and communications.MT, AT, EATTesting a Digital Substation Versus a Conventional OneWhich tests disappear, which change and which are new when copper wiring gives way to fiber and IEC 61850 messages, with a worked example in hours.MT, ATBreaker Trip and Close Tests Before EnergizingWhat is measured when a breaker is tripped and closed at commissioning: time per pole, pole spread, total time from the relay, with a worked example.