Home / Guides / Testing, commissioning and faults / Circuit breakers and switchgear
Circuit breakers and switchgear
Testing, commissioning and faults
MTIAC Internal Arc Classification of Switchgear (IEC 62271)What an IAC panel declares under IEC 62271-200: arc current IA and IAe, duration, classified sides and the five internal arc test criteria, explained.MTRMU (Ring Main Unit) Testing: Medium-Voltage CommissioningRMU testing: gas, operation, interlocks, insulation, on-site withstand, contacts, timing, relay or fuses and cables, before energizing.BTLow-voltage circuit breaker testing: ACB and MCCBTests on a low-voltage ACB or MCCB: LSIG trip unit by secondary or primary injection, mechanical operation, contact resistance and insulation resistance.MTSeismic Qualification of Medium-Voltage SwitchgearHow IEC TS 62271-210 qualifies medium-voltage switchgear against earthquakes: 0.5 g and 1 g severity levels, acceptance classes, testing and analysis.BTLow-Voltage Circuit Breaker: Interrupting RatingRatings of a low-voltage circuit breaker, how molded-case and integrally fused breakers limit current, and the effect of the power factor in practice.MTVPIS Voltage Presence Indicators (IEC 62271-206)What a VPIS is under IEC 62271-206, which indication thresholds it must meet and why its signal alone does not prove the switchgear is de-energized.MT/AT/EATSwitchgear Installation: Final Inspection and DataTransport, erection and final inspection of switchgear or a breaker under IEC 62271-1 (2017) and the data that the user and the manufacturer exchange.MTValidity of Type Tests on MV SwitchgearWhen a design change to medium-voltage switchgear requires repeating a type test, when the result may be extended, per IEC TR 62271-307 in practice.MTLSC Loss of Service Continuity Categories (IEC 62271-200)What LSC1, LSC2, LSC2A and LSC2B mean in IEC 62271-200: which compartments can be opened with the busbar energized and how the switchgear design changes.MTAccessibility Types A and B in Internal Arc SwitchgearWhat accessibility types A, B and C and sides F, L and R of an IAC panel mean under IEC 62271-200, and how the cloth indicators are used in the test.