MT/BTDry-Type Transformer Maintenance, Temperature, TestsDry-type transformer maintenance: normal temperature, thermal class F and H, RTD probes and temperature relay, cleaning, moisture and electrical tests.BT, MTSwitchgear and MCC commissioning: tests and checksCommissioning LV switchgear, panels and MCCs: IEC 61439 routine verification, FAT and SAT, insulation, functional tests, interlocks and energization.MT/BTSpain Transformation Centers: Maintenance and InspectionSpanish transformer substation: maintenance contract (ITC-RAT 22), inspection every three years (ITC-RAT 23), what is checked and who signs it in practice.BT, MT, AT, EATInfrared Thermography: What It Detects and How to Read ItWhat infrared thermography detects in electrical equipment, why it is done under load, how a hot spot is classified (ΔT) and how to read the report.MT/AT/EATHow Often Should a Substation Be Maintained?How often an electrical substation needs maintenance: what sets the frequency under local code, NFPA 70B and NETA, and what shortens or lengthens it.MT/AT/EATSubstation Maintenance Report: What It Must IncludeWhat a substation maintenance report must contain: scope, data per asset, results with criteria, comparison with the prior test, findings and appendices.MTMV Switchgear Maintenance: What Gets InspectedWhat to check in medium-voltage switchgear maintenance: busbars, insulators, breaker, withdrawable truck, interlocks, auxiliaries and electrical tests.BT/MT/ATNFPA 70B: Electrical Maintenance Is Now a StandardWhat NFPA 70B is, what changed when it went from recommended practice to standard, the 2026 edition, the maintenance program (EMP) and how to use it.BT/MT/AT/EATElectrical predictive maintenance: techniques and useWhat electrical predictive maintenance is, which techniques it uses on transformers, switchgear and cables, what each one detects and when it pays off.